Overview
Master the essential skills needed to maintain and repair electronic and electrical devices with this comprehensive course. Designed for both beginners and experienced technicians, this course offers hands-on training and in-depth insights into troubleshooting, testing, and maintaining a wide range of devices. Learn how to handle tools, test components, and follow safety protocols while building a solid understanding of electrical and electronic principles. With practical demonstrations and step-by-step guidance, you’ll gain the confidence to tackle maintenance tasks and advance your technical expertise.
Learning Outcomes
By the end of this course, you will:
- Understand the basics of electronic and electrical maintenance.
- Gain expertise in using tools like multimeters, oscilloscopes, and soldering irons.
- Learn to test and repair components such as resistors, capacitors, diodes, and transistors.
- Develop troubleshooting skills to identify and resolve common device issues.
- Apply key concepts like Ohm’s Law, circuit design, and safety procedures.
- Enhance practical skills with real-world testing and maintenance scenarios.
Who is This course for?
There is no experience or previous qualifications required for enrolment on this Electronic & Electrical Devices Maintenance. It is available to all students, of all academic backgrounds including:
- Beginners interested in electronic and electrical maintenance.
- Technicians seeking to upgrade their troubleshooting and repair skills.
- Engineering students aiming to build hands-on expertise in electronics.
- Hobbyists passionate about working with electronic and electrical devices.
Requirements
This course is open to all learners. No prior technical knowledge is required, although a basic understanding of electronics or a keen interest in device maintenance will be helpful. All necessary materials are included to ensure an accessible learning experience.
Career Path
- Electronics Maintenance Technician
- Electrical Repair Specialist
- Field Service Engineer
- Home Appliance Technician
- Electrical/Electronics Design Assistant
- Technical Support Specialist
Course Curriculum
- 9 sections
- 58 lectures
- 2 days, 16 hours total length
-
Unit 1: Introduction 00:02:00 -
Unit 2: Instructor’s Introduction 00:03:00
-
Unit 1: Becoming a Troubleshooter 00:02:00
-
Unit 1: Tools Needed 00:01:00
-
Unit 2: Multimeters 00:07:00
-
Unit 3: Wire Cutter and Stripper 00:03:00
-
Unit 4: Wiring Tools Soldering Iron 00:02:00
-
Unit 5: Screw Drivers 00:03:00
-
Unit 6: Pliers 00:02:00
-
Unit 7: Wrench 00:02:00
-
Unit 8: Oscilloscope and Function Generator 00:03:00
-
Unit 1: Passive Electronic Components 00:03:00
-
Unit 2: Active Electronic Component Diode 00:03:00
-
Unit 3: Active Electronic Component Transistor 00:03:00
-
Unit 4: Common Electronic and Electrical Components 00:05:00
-
Unit 1: Testing a Fuse 00:03:00
-
Unit 2: Testing a Bulb or Lamp 00:02:00
-
Unit 3: Testing a Switch 00:01:00
-
Unit 4: Testing a Transformer 00:04:00
-
Unit 5: Testing a Resistance 00:08:00
-
Unit 1: Safety Concerns 00:05:00
-
Unit 2: Main Concerns – Maintenance 00:02:00
-
Unit 3: Main Concerns – Servicing 00:02:00
-
Unit 4: Troubleshooting Part – 1 00:03:00
-
Unit 5: Troubleshooting Part – 2 00:04:00
-
Unit 1: Introduction 00:05:00
-
Unit 2: Voltage Current and Resistance 00:06:00
-
Unit 3: Types of Current 00:03:00
-
Unit 4: Types of Circuits 00:02:00
-
Unit 5: Practical: Introduction to Digital Multimeter DMM 00:07:00
-
Unit 6: Volt Ohm Meter Basics 00:05:00
-
Unit 7: Measuring Voltage 00:13:00
-
Unit 8: Practical: How to Measure DC Voltage 00:03:00
-
Unit 9: Measuring Current 00:05:00
-
Unit 10: Measuring Currents – Lab Experiment Explained 00:11:00
-
Unit 11: Practical 1: How to Measure Current 00:04:00
-
Unit 12: Practical 2: How to Measure Current 00:01:00
-
Unit 13: Measuring Resistance 00:08:00
-
Unit 14: Practical: How to Test Resistors 00:05:00
-
Unit 15: Circuit Diagram Basics and Basic Symbols 00:12:00
-
Unit 16: Introduction to Resistor and Color Band Coding 00:09:00
-
Unit 17: Power Dissipation + Parallel and Series Resistors 00:12:00
-
Unit 18: Ohm’s Law 00:14:00
-
Unit 19: Introduction to Capacitors 00:11:00
-
Unit 20: Capacitors Behavior + Capacitors in Series and Parallel 00:07:00
-
Unit 21: Practical 1: How to Test a Capacitor 00:03:00
-
Unit 22: Practical 2: How to Test A Capacitor 00:02:00
-
Unit 23: Introduction to Inductors 00:07:00
-
Unit 24: Practical: How to Test and Measure Coils 00:06:00
-
Unit 25: Introduction to Diode + Zener Diode and LED 00:08:00
-
Unit 26: Practical 1: How to Test a Diode 00:02:00
-
Unit 27: Practical 2: How to Test a Diode 00:02:00
-
Unit 28: Introduction to Transistors 00:10:00
-
Unit 29: Practical 1: How to Test a Transistor 00:04:00
-
Unit 30: Practical 2: How to Test a Transistor 00:04:00
-
Unit 31: Practical 3: How to Test a Transistor 00:03:00
-
Assignment – Electronic & Electrical Devices Maintenance & Troubleshooting 01:00:00
-
Claim Your Certificate
Frequently Bought Together
Python for Data Visualization: The Complete Masterclass
4.7
(1 student)
Big Data Analytics with PySpark Tableau Desktop and MongoDB
4.7
(1 student)
4.8 course rating - 15 reviews
£12.99
£419
This course includes:
-
Duration:2 days, 16 hours
-
Access:1 year access
-
Units:58
-
Level:
-
CPD Points:10
-
Certificate:Yes
